DRL-S210-amp
Audio Performance redefines the standard for compact mobile line source speakers. Stylish, high-output, ultra-compact fullrange arrays with preciselycontrollable dispersion and high acoustic output.
DRL-S210 combines the latest in transducer technology, in a super-compact package, with an innovative, digital controlled design, to produce a system with superb acoustic output and the bestpossible dispersion control. DRL-S210 systems work as line sources and make defined, controllable, cylindrical sound-fields. The correct use of this remarkable technology solves many acoustical problems.
The Self-Powered SUB210-amp Subwoofer carries a 2 channels Audio Power Amplifier capable to deliver 2x 1’250W in 2 ohms. It incorporates a complete networked 96KHz digital signal processing (DSP) providing loudspeaker specific filtering, EQ, delays and protection functions.
- High Sound Pressure Level
- Fashion Design
- Slim Form Factor
- Self Powered
- 28Hz Cut Off Frequency
- Available in any colours
ACOUSTICAL
Frequency response (1): 42Hz - 22'000Hz +/- 3dB (SUB28: 42 – 180Hz; RubiQ: 180 – 22’000Hz)
Phase response: 350Hz – 10KHz +/- 45°
Maximum peak SPL (2): 126dB
Coverage: H 100° x V 14°
TRANSDUCERS
SUB28: 2x8” long excursion, low distortion cone driver
Nominal impedance: 4 Ohms
Power Handling: 120W RMS (AES) (4)
RubiQ: 1x3” full range cone driver
Nominal impedance: 8 Ohms
Power Handling: 30W RMS (AES) (4)
AMPLIFIER MODULE
Output power: SUB28: 2 x 190W Class D
RubiQ: 2 x 190W Class D
AUDIO INPUT:
Type: Analog differential balanced input circuit,
Connectors: 2x XLR female (left/right)
Nominal impedance: 10 KΩ
XLR wiring: 1=GND, 2=Hot, 3=Cold
DSP:
Sampling rate: 24bit/96Hz
Basic delay: 0.76 ms
Dynamic range: 113dB
AC power:
Connector: IEC Main connector,
Input voltage: 115 – 250V nominal +/- 10%
MECHANICAL DATA
SUB28 size (WxHxD): 252 x 450 x 500mm
Cabinet finish: 16mm MDF, any colors
Weight: 17kg
RubiQ3”: 110 x 110 x 80mm
Cabinet finish: 16mm MDF, any colors
Weight: 0.8Kg
(1) Frequency response: +/- 3dB, measured at 3 meters, onaxis, half-space conditions – MLSSA 1/3 octave
(2) Max peak SPL: Measured with music referred to 1 meter
(3) Crossover: Acoustical crossover frequency - at these frequency, transducers produce equal sound pressure level
(4) AES: Power handling is measured under AES standard conditions
(5) Power AMPS: Amplifier RMS output power per channel into 2 ohms, both channel driven
Frequency response (1): 28Hz - 18'000Hz +/- 3dB (SUB210: 28Hz – 180Hz; DRL12: 180Hz – 18’000Hz)
Phase response: 350Hz – 10KHz +/- 45°
Maximum peak SPL (2): 126dB,
Coverage: Horizontal 100°/ Vertical: 14°
SUB210: 2x 10” long excursion, low distortion cone driver
Nominal impedance: 4 Ohms
Power Handling: 600W RMS (AES) (4)
DRL12: 12x 3.5” full range cone driver
Nominal impedance: 10 Ohms
Power Handling: 240W RMS (AES) (4)
Output power: SUB210: 1 x 1'250W@2ohms Class D
DRL12: 1 x 1'250W@2ohms Class D
Type: Analog differential balanced input circuit,
Connectors: XLR female In, XLR male Loop
Nominal impedance: 10 KΩ
XLR wiring: 1=GND, 2=Hot, 3=Cold
Connector: PowerCon TRUE1
Input voltage: 115 – 250V nominal +/- 10%
Sampling rate: 24bit/96Hz
Basic delay: 0.76 ms
Dynamic range: 113dB
Type: PC and PodWare Software
Connectors: RJ45 female, RJ45 loop
SUB210 size (WxHxD): 330 x 680 x 500mm
Cabinet finish: 15mm plywood , any RAL colour
Weight: 28kg
DRL12: 110 x 1111 x 160mm
Cabinet finish: 12mm plywood, any RAL colors
Weight: 12Kg
(1) Frequency response: +/- 3dB, measured at 3 meters, on axis, half-space conditions - MLSSA 1/3 octave
(2) Max peak SPL: Measured with music referred to 1 meter
(3) Crossover: Acoustical crossover frequency - at these frequency, transducers produce equal sound pressure level
(4) AES: Power handling is measured under AES standard conditions
(5) Power AMPS: Amplifier RMS output power per channel into 2 ohms, both channel driven