FR6-AMP

The FR6-amp is a self-powered central speaker for home cinema system.

This channel forms the heart of the system defining the focal point for all cinematic action. This central full range speaker has a uniform horizontal polar response preserving the spectral balance of spoken word. It consists of two 6.5" mid-bass drivers and a 1" dome tweeter mounted in a vented enclosure.

Key features 
  • Self-powered
  • High pressure level
  • FIR filtering
  • Custom box and grille available in any colour and any wood essence
Specifications 

Keep empty

Acoustical 

 

Frequency response (1):  55Hz - 20KHz, +/- 3db

Phase response:    350Hz - 10KHz +/- 45°

Maximum peak SPL (2):   118dB

Coverage :    Horizontal: 120° - Vertical:  90°   

 

Transducers 

Low frequency:   2 x 6.5 inch, long excursion, low distortion cone driver

High frequency:   1 x 1 inch soft dome tweeter

Amplifiers 

Output power (low) (5):   120W RMS / 4 Ohms

Output power (high) (5):    60WRMS / 8 Ohms

THD, DIM, SMPTE:   <0,05%

Audio Input 

Type:   Analog Differential balanced input circuit

Connectors:    Female XLR; Male XLR loop

Nominal impedance:   10K Ohm

Sensitivity:   -10dBm, 0dBm, +4dBm (Switch)

AC Power 

Connectors:   3-pin IEC receptacle

Input voltage:   230V 200VA max, 115V on request

DSP 

Sampling rate:   96 KHz

Basic delay:   0.76 ms

Dynamic range:   115dB          

Mechanical 

Cainet Size (WxHxD):   500 x 200 x 358mm

Cabinet finish:   Standard: Black or White, structured acrylic paint and black or white front grill

            Option:   Any RAL color structured
                          acrylic paint
                          Any RAL color lacquered
                          Any RAL color for front grill
                          Wood finish

Protective grill:   1,6mm steel, foam cover inside

Weight:   14Kg

Elements & Accessories 

SUBHC112
SUBHC115

(1) Frequency response: +/- 3sd, measured at 3 meters, on axis, half-space conditions -  MLSSA 1/3 octave

(2) Max peak SPL: Measured with music referred to 1 meter

(3) Crossover: Acoustical crossover frequency - at these frequency, transducers produce equal sound pressure level

(4) AES: Power handling is measured under AES standard conditions

(5) Power AMPS: Amplifier RMS output power per channel into 2 ohms, both channel driven