SL2-F
The SL2-F loudspeaker is a fully horn-loaded cabinet made for applications where directivity and power are of utmost importance. Top sound quality : the SL2-F system is a processor controlled 2 way active design, LO & MID/HI. The SL2-F uses two proprietary 12 inch low frequency cone driver house in a horn-loaded enclosure and a 1,4 inch high frequency driver loaded with a 70° x 40°CD horn. The drivers are acoustically aligned at the same vertical plane producing thus an astonishing flat and smooth frequency and phase response from 40Hz to 20KHz. With a cut-off frequency of 40HZ, the SL2-F can be used as a stand alone full range cabinet, or can be associated with the SUB800 or SUB1000 subwoofer to extend the low frequency response of the entire sound system.
- Full range
- High efficiency
- Long throw
- Arrayable
Keep empty
Frequency response (1): 40Hz - 20'000Hz
Maximum peak SPL (2): 146dB
Coverage: H 70° x V 40°
Low frequency: 2 x 12", ferrofluid cooled, long excursion
Nominal Impedance: 4 Ohms
High frequency: 1 x 3" diaphragm, ferrofluid cooled compression driver, loaded with 70° x 40° CD horn
Nominal Impedance: 8 Ohms
Power Handling (4): Low section: 800W (AES); High section: 140W (AES)
Connectors: 2 x Neutrik Speakon NL4MP (wired in parallel)
Cabinet Size (WxHxD): 564 x 1500 x 758 mm
Cabinet finish: 15 & 18 mm plywood, black epoxy painted, other colours on request
Rigging: Aircraft L-track fittings, front and back
Protective grill: Removable perforated 1,6mm steel, foam cover inside
Weight: 115Kg
- SUB800
- AP44M20
- AP48M20
(1) Frequency response: +/- 3dB, measured at 3 meters, on axis, half-space conditions - MLSSA 1/3 octave
(2) Max peak SPL: Measured with music referred to 1 meter
(3) Crossover: Acoustical crossover frequency - at these frequency, transducers produce equal sound pressure level
(4) AES: Power handling is measured under AES standard conditions
(5) Power AMPS: Amplifier RMS output power per channel into 2 ohms, both channel driven