SD2

The SD2 loudspeaker system is a compact high-power device designed to perform in a wide range of public address and sound reinforcement applications. It is a bi-amplified system consisting of mid-low, high frequency vented enclosure including a proprietary 12" low frequency cone driver and a 3" diaphragm high frequency driver with a 90° x 40° CD horn. The enclosure is black epoxy painted fitted with handles on the side and with four aircraft pan fittings.(Two on top and two on bottom). The front of the speaker is protected by a heavy duty metal grill, covered with charcoal grey foam.
The SD2 loudspeaker system is designed to operate with the ALC48 processor unit, which contains electronic crossover, speakers sense, drivers protection, amplitude and phase response alignment circuitry optimised for the loudspeakers. The ALC48 controller allows the loudspeaker to be operated at full capacity with maximum fidelity and reliability. The trapezoidal shape of the cabinet allows cluster designs, enabling maximum mutual coupling and single-point source arrays. 

Key features 
  • Compact
  • 2Way Full Range
  • Electronically controlled
  • High SPL
Specifications 

Keep empty

Acoustical 

Frequency response (1):   55Hz - 20''000 Hz ± 3dB

Maximum peak SPL (2):   133dB

Directivity:  H 90° x V 40°

Transducers 

Low frequency:     1 x 12", long excursion, low distortion cone driver, ferrofluid cooled

Nominal Impedance:   8 Ohms

Power Handling:   400W (AES) (4)

High frequency:    3" diaph. compression driver, ferrofluid cooled, loaded with a 90° x 40° CD horn

Nominal Impedance:   8 Ohms

Power Handling:   140W (AES) (4)

Connectors:   2 x Neutrik Speakon NL4MP (wired in parallel)

Mechanical 

Cabinet Size (WxHxD):   400 x 600 x 365 mm 

Cabinet shape: trapezoidal 7.5°

Cabinet finish:   Black epoxy painted, other colours on request

Rigging:   4x aircraft pan fittings (2 on top, 2 on bottom)

Protective grill:   Front metal grill covered with charcoal grey foam

Weight:   29Kg

 

Elements & Accessories 
  • AP5000
  • SUB3
  • SUB400
  • SUB800

 

Pdf 
Galerie 

(1) Frequency response: +/- 3dB, measured at 3 meters, on axis, half-space conditions -  MLSSA 1/3 octave

(2) Max peak SPL: Measured with music referred to 1 meter

(3) Crossover: Acoustical crossover frequency - at these frequency, transducers produce equal sound pressure level

(4) AES: Power handling is measured under AES standard conditions

(5) Power AMPS: Amplifier RMS output power per channel into 2 ohms, both channel driven