SL2-F-amp

The SL2-F-amp loudspeaker is a powered version of the SL2-F loudspeaker system wich is a fully horn loaded cabinet made for application where directivity and power are of importance. The SL2-F-amp uses two proprietary 12 inch low frequency cone driver housed in a horn loaded enclosure and a 1,4 inch high frequency driver loaded with a 70° x 40° CD horn. The SL2-F-amp is easily arrayable with its 8.5° trapezoidal shape and Ltrack rigging flying hardware.

Key features 
  • Full range
  • High efficiency
  • Long throw
  • Arrayable
  • Ethernet Networking
  • PC remote controlled
Specifications 

Keep empty

Acoustical 

Frequency response (1):   40Hz - 20'000Hz

Phase response:   350Hz - 10KHz +/- 45°

Maximum peak SPL (2):   146dB

Transducers 

Low frequency:     2 x 12", ferrofluid cooled, long excursion

High frequency:    1 x 3" diaphragm, ferrofluid cooled compression driver, loaded with 70° x 40° CD horn

 

Amplifiers 

Output power (low1) (5):   1'250W 

Output power (low2) (5):   1'250W 

THD, DIM, SMPTE:   <0,05%

Audio Input 

Type:   Analog Differential balanced input circuit

Connectors:    Female XLR; Male XLR loop

Nominal impedance:   10K Ohms

AC Power 

Connectors:   Female PowerCon, in; Male PowerCon loop

Input voltage:   115V - 230V nominal +/- 10%

DSP 

Sampling rate:   96 Khz

Basic delay:   0.76 ms

Dynamic range:   115 dB

Remote / Network 

Type:    Ethernet

Connectors:    RJ45 female, RJ45 loop

Mechanical 

Cabinet Size (WxHxD):   564 x 1502 x 758 mm 

Cabinet finish:   15 & 18mm plywood, black epoxy painted, other colours on request

Rigging:   Aircraft L-track fittings, front and back

Protective grill:   Removable perforated 1,6mm steel, foam cover inside

Weight:   115Kg

Elements & Accessories 
  • SUB400-amp
  • SUB800-amp

(1) Frequency response: +/- 3sd, measured at 3 meters, on axis, half-space conditions -  MLSSA 1/3 octave

(2) Max peak SPL: Measured with music referred to 1 meter

(3) Crossover: Acoustical crossover frequency - at these frequency, transducers produce equal sound pressure level

(4) AES: Power handling is measured under AES standard conditions

(5) Power AMPS: Amplifier RMS output power per channel into 2 ohms, both channel driven