SUB400-amp
The SUB400-amp is a compact self-powered subwoofer cabinet designed to extend the frequency range and power bandwidth of Audio Performance full-range loudspeaker systems. With a cut-off frequency of 25Hz, the SUB400-amp is made for applications where the reproduction of sub frequencies is of importance (music, sound effects).
It consists of two long excursion 18-inch cone drivers mounted in a heavily braced vented enclosure.
- Self powered
- 25Hz cut-off frequency
- Optimal LF coupling
- PC remote controlled
Keep empty
Frequency response (1): 25Hz - 150Hz
Maximum SPL peak (2): 137dB
Low frequency : 1x 18" inch, ferrofluid cooled, long excursion, low distortion cone driver
Output power (bridge) (5): 2'500W RMS
THD, DIM, SMPTE: <0,05%
Type: Analog Differential balanced input circuit
Connectors: Female XLR; Male XLR loop
Nominal impedance: 10K Ohm
Connectors: Female PowerCon, in; Male PowerCon loop
Input voltage: 115V - 230V nominal +/- 10%
Sampling rate: 96 Khz
Basic delay: 0.76 ms
Dynamic range: 115dB
Type: PC and PodWare Software
Connectors: RJ45 female, RJ45 loop
Cabinet Size (WxHxD): 603 x 536 x 780mm
Cabinet finish: Black epoxy painted
Rigging: Aircraft L-track fittings on the sides
Protective grill: Removable perforated 1,6mm steel, foam cover inside
Weight: 58Kg
- Dolly
(1) Frequency response: +/- 3dB, measured at 3 meters, on axis, half-space conditions - MLSSA 1/3 octave
(2) Max peak SPL: Measured with music referred to 1 meter
(3) Crossover: Acoustical crossover frequency - at these frequency, transducers produce equal sound pressure level
(4) AES: Power handling is measured under AES standard conditions
(5) Power AMPS: Amplifier RMS output power per channel into 2 ohms, both channel driven