DLA10 amp
The DLA10-amp is a compact 2 way self-powered line array loudspeaker. It’s a light, simple and versatile product designed to deliver great sound into medium and large venues.
The two way full range Loudspeaker consists of: 2 x 10” ND low frequency cone driver with a in-house designed phase plug that optimizes the vertical coverage and avoid the need of mid-range drivers, and one 1.4” exit, 3” voice coil compression driver mounted in a complex Audio Performance Wave Guide, loaded with an adjustable horizontal constant directivity horn, gives the user to adapt the horizontal directivity by step of 15° from 60° to 120° without removing the front grill.
The specific conception enables the DLA10-amp to reach 55Hz without the need of a subwoofer and to deliver a flat frequency response up to 20KHz (+/- 3dB).
The DLA10-amp built-in electronics package features a new lightweight, two channel class D audio power amplifier (D2SP) designed specifically for self-powered products.
- Horizontal directivity adjustable from :
- Symetric : 60°, 90°, 120°
- Asymetric : 75°, 90°, 105°
- Symetrical design
- High power
- Compact size
Keep empty
Frequency response (1): 55Hz - 20'000Hz, +/- 3db
Phase response: 350Hz – 10Hz +7- 45°
Maximum peak SPL (2): 141dB
Coverage: Horizontal: adjustable from 60° to 120° / 15° step Symetric or Asymetric
Vertical: varies with array length and array configuration
Low frequency: 2x 10" ND long excursion, low distortion ND cone driver
High frequency: 1x 1,4" exit, 3" diaphragm ND compression driver, loaded with patented waveguide
Output power (low) (5): 1'250W RMS
Output power (high) (5): 1'250W RMS
THD, DIM, SMPTE: <0,05%
Type: Analog Differential balanced input circuit
Connectors: Female XLR; Male XLR loop
Nominal impedance: 10K Ohm
Connectors: Female PowerCon, in; Male PowerCon loop
Input voltage: 115V - 230V nominal +/- 10%
Sampling rate: 96 KHz
Basic delay: 0.76 ms
Dynamic range: 115dB
Type: Ethernet
Connector: RJ45 female, RJ45 loop
Cabinet Size (WxHxD): 730 x 270 x 610mm
Cabinet finish: 15mm plywood, black epoxy painted, other colours on request
Rigging: Patent Pending Three Point Rigging system
Protective grill: Removable perforated 1,6mm steel, foam cover inside
Weight: 38Kg
- EaseFocus3.0
- Bumper DLA10
- SUB10-amp
- SUB800-amp
- SUB1000-amp
(1) Frequency response: +/- 3dB, measured at 3 meters, on axis, half-space conditions - MLSSA 1/3 octave
(2) Max peak SPL: Measured with music referred to 1 meter
(3) Crossover: Acoustical crossover frequency - at these frequency, transducers produce equal sound pressure level
(4) AES: Power handling is measured under AES standard conditions
(5) Power AMPS: Amplifier RMS output power per channel into 2 ohms, both channel driven