DRL-S12-amp

Audio Performance redefines the standard for compact mobile line source speakers. Stylish, high-output, ultra-compact fullrange arrays with preciselycontrollable dispersion and high acoustic output.

DRL-S12-amp combines the latest in transducer technology, in a super-compact package, with an innovative, digital controlled design, to produce a system with superb acoustic output and the bestpossible dispersion control. DRL-S12-amp systems work as line sources and make defined, controllable, cylindrical sound-fields. The correct use of this remarkable technology solves many acoustical problems.
The Self-Powered SUB28-amp Subwoofer carries a 2x channels Audio Power Amplifier capable to deliver 2x 500W into 4 ohms. It incorporates a complete networked 96KHz digital signal processing (DSP) providing loudspeaker specific filtering, EQ, delays and protection functions.

Key features 
  • High Sound Pressure Level
  • Fashion Design
  • Slim Form Factor
  • Self Powered
  • 42Hz Cut Off Frequency
  • Available in any colours
Specifications 

ACOUSTICAL

Frequency response (1):  42Hz - 18'000Hz  +/- 3dB (SUB28: 42Hz – 180Hz; RubiQ: 180Hz – 18'000Hz)

Phase response: 350Hz – 10KHz +/- 45°

Maximum peak SPL (2):   126dB

Coverage: H 100° x V 14°

 

TRANSDUCERS

SUB28: 1x 8” long excursion, low distortion cone driver

Nominal impedance: 8 Ohms

 

 

 

AMPLIFIER MODULE

Output power:  SUB28: 2 x 190W Class D

 RubiQ: 2 x 190W Class D

 

AUDIO INPUT:

Type:   Analog differential balanced input circuit,

Connectors:  2x XLR female (left/right)      

Nominal impedance: 10 KΩ

XLR wiring: 1=GND, 2=Hot, 3=Cold

 

DSP: 

Sampling rate: 24bit/96Hz

Basic delay:   0.76 ms

Dynamic range: 113dB

 

AC power:   

Connector: IEC Main connector,

Input voltage: 115 – 250V nominal +/- 10%

 

MECHANICAL DATA

SUB28 size (WxHxD):   252 x 450 x 500mm

Cabinet finish:   16mm MDF, any colors

Weight: 17kg

RubiQ3”:  110 x 110 x 80mm

Cabinet finish: 16mm MDF, any colors

Weight:   0.8Kg

 

 

(1) Frequency response: +/- 3dB, measured at 3 meters, onaxis, half-space conditions – MLSSA 1/3 octave

(2) Max peak SPL: Measured with music referred to 1 meter

(3) Crossover: Acoustical crossover frequency - at these frequency, transducers produce equal sound pressure level

(4) AES: Power handling is measured under AES standard conditions

(5) Power AMPS: Amplifier RMS output power per channel into 2 ohms, both channel driven

Acoustical 

Frequency response (1):  42Hz - 18'000Hz  +/- 3dB (SUB28: 42Hz – 180Hz; DRL12: 180Hz – 18’000Hz)

Phase response: 350Hz – 10KHz +/- 45°

Maximum peak SPL (2):   126dB,

Coverage: Horizontal 100°/ Vertical: 14°

Transducers 

SUB28: 1x 8” long excursion, low distortion cone driver

Nominal impedance: 8 Ohms

Power Handling: 280W RMS (AES) (4)

DRL12: 12x3.5” full range cone driver

Nominal impedance: 10 Ohms

Power Handling: 240W RMS (AES) (4)

Amplifiers 

Output power:  2x 500W class D

Audio Input 

Type:   Analog differential balanced input circuit,

Connectors:  XLR female In, XLR male Loop  

Nominal impedance: 10 KΩ

XLR wiring: 1=GND, 2=Hot, 3=Cold

AC Power 

Connector: PowerCon TRUE1

Input voltage: 230V nominal +/- 10%, 115V optional

DSP 

Sampling rate: 24bit/96Hz

Basic delay:   0.76 ms

Dynamic range: 113dB

Mechanical 

SUB28 size (WxHxD):   450 x 250 x 500mm

Cabinet finish:   15mm plywood , any RAL colour

Weight: 17kg

DRL12:  110 x 1111 x 160mm

Cabinet finish: 12mm plywood, any RAL colors

Weight:   12Kg

DRL-STAND:  110 x 860 x 160mm

Cabinet finish: 12mm plywood, any RAL colors

Weight:   6Kg

 

 

Pdf 
DRL12_Pro.pdf
Galerie 

(1) Frequency response: +/- 3dB, measured at 3 meters, on axis, half-space conditions -  MLSSA 1/3 octave

(2) Max peak SPL: Measured with music referred to 1 meter

(3) Crossover: Acoustical crossover frequency - at these frequency, transducers produce equal sound pressure level

(4) AES: Power handling is measured under AES standard conditions

(5) Power AMPS: Amplifier RMS output power per channel into 2 ohms, both channel driven