Home Cinema 5.1

For many years now Audio Performance has been developing speaker systems, that enjoy an impeccable reputation among sound professionals. This wealthy experience was used to create a 5.1 sound system beyond the ordinary offering new standards and a level of performance not previously available. The core philosophy while engineering the HC5 was to develop a system without any compromises regarding neutrality, tonal balance, smooth response and low distortion whilst retaining high sound pressure and the legendary durability of Audio Performance products. All components have been purposely designed to reproduce the sound field that was originally intended by the motion picture soundtrack. Components of the same type were used for all speakers in order to preserve exactly the same timbre quality and spectral consistency across all channels.

The system consists of two left-right,one central, two surround speakers andone subwoofer. All units, except the sub-woofer, are true 2-way active, self-pow-ered, allowing extremely accurate signalreproduction. The build in amplifier mod-ules allow the system to be set up easi-ly requiring only main supply and inputsignal connections. Integrated specialprotection circuitry makes the amplifiermodules practically repair free. All ampli-fiers are calibrated at factory ensuringconsistent quality.

Key features 
  • Self-powered
  • High pressure level
  • FIR Filtering
  • Custom box and grille available in any colour and any wood essence
Specifications 

Keep empty

Acoustical 

Frequency response (1):  45Hz - 20KHz, +/- 3db

Phase response:    350Hz - 10KHz +/- 45°

Maximum peak SPL  (2):   118dB

Coverage:    Horizontal: 90° - Vertical:  60°   

Transducers 

Low frequency :   2 x 6.5 inch, long excursion, low distortion cone driver

High frequency:   1 x 1 inch dome tweeter

Amplifiers 

Output power (low) (5):   120W RMS / 4 Ohms

Output power (high) (5):    60WRMS / 8 Ohms

THD, DIM, SMPTE:   <0,05%

Audio Input 

Type:   Analog Differential balanced input circuit

Connectors:    Female XLR; Male XLR loop

Nominal impedance:   10K Ohm

Sensitivity:   -10dBm, 0dBm, +4dBm (Switch)

AC Power 

Connectors:   3-pin IEC receptacle

Input voltage:   230V 200VA max, 115V on request

DSP 

Sampling rate:   96 KHz

FIR:  512 taps

Basic delay:   0.76 ms

Dynamic range:   115dB

Mechanical 

Cainet Size (WxHxD):   200 x 1200 x 358mm

Cabinet finish:   Standard: Black or White, structured acrylic paint and black or white front grill

           Option:   Any RAL color structure acrylic paint
                            Any RAL color lacquered
                            Any RAL color for front grill
                            Wood finish

Protective grill:   1,6mm steel, foam cover inside

Weight:   21Kg

(1) Frequency response: +/- 3dB, measured at 3 meters, on axis, half-space conditions -  MLSSA 1/3 octave

(2) Max peak SPL: Measured with music referred to 1 meter

(3) Crossover: Acoustical crossover frequency - at these frequency, transducers produce equal sound pressure level

(4) AES: Power handling is measured under AES standard conditions

(5) Power AMPS: Amplifier RMS output power per channel into 2 ohms, both channel driven