MP10 amp

The MP10-amp loudspeaker system is a self-powered system that combines exceptionally accurate reproduction with high SPL output in a very compact multi-purpose enclosure. The MP10-amp uses a proprietary 10 inch ND cone low frequency driver mounted in a vented enclosure with carrying handle. The high frequency unit is a 2 inch diaphragm high frequency ND compression driver couple to a in house designed 40°/90°x 60° asymmetrical horn. A unique Active Speaker Output (ASO) allows the user to connect a slave unit called MP10-S to the MP10-amp.

The MP10-amp comes with a 35mm tube adapter and its multi-angle design allows the user a variety of applications.

Key features 
  • Asymmetrical horn
  • High efficiency
  • Low distortion
  • Self-powered
Specifications 

ACOUSTICAL

Frequency response (1):  55Hz - 20'000Hz +/-3dB

Maximum peak SPL (2):   130dB

Coverage: 40°/90° by 60° (4 positions)

 

TRANSDUCERS

Low frequency :   10 inch, long excursion, low distortion ND cone driver

High frequency:   2 inch diaphragm ND compression driver, loaded with asymmetrical horn

 

AMPLIFIERS

Output power (low) (5):   1'250W (EIAJ-1KHZ, 1%THD)

Output power (high) (5):  1'250W (EIAJ-1KHZ, 1%THD)

THD, DIM, SMPTE:   <0,05%

 

AUDIO INPUT

Type:   Differential balanced input circuit

Connectors:    Female XLR; Male XLR loop

Nominal impedance:   electronically balanced 10k Ohms

 

AC POWER

Connectors:   Female PowerCon, in, Male PowerCon loop

Input voltage (EU):   115V - 250V AC

 

MECHANICAL

Cabinet size (WxHxD):   290 x 360 x 321mm

Cabinet finish:   Black epoxy painted

Protective grill:   Removable perforated steel grill covered with charcoal grey foam

Weight:   20Kg

 

 

(1) Frequency response: +/- 3sd, measured at 3 meters, on axis, half-space conditions -  MLSSA 1/3 octave

(2) Max peak SPL: Measured with music referred to 1 meter

(3) Crossover: Acoustical crossover frequency - at these frequency, transducers produce equal sound pressure level

(4) AES: Power handling is measured under AES standard conditions

(5) Power AMPS: Amplifier RMS output power per channel into 2 ohms, both channel driven

Acoustical 

Frequency response (1):  55Hz - 20'000Hz +/-3dB

Phase response:  350Hz - 10KHz + / - 45°

Maximum peak SPL (2):   130dB

Coverage:  40°/90° by 60° (4 positions)

Transducers 

Low frequency :   10 inch, long excursion, low distortion ND cone driver

High frequency:   2 inch diaphragm ND compression driver, loaded with asymmetrical horn

Amplifiers 

Output power (low) (5):   1'250W (EIAJ-1KHZ, 1%THD)

Output power (high) (5):  1'250W (EIAJ-1KHZ, 1%THD)

THD, DIM, SMPTE:   <0,05%

Audio Input 

Type:   Differential balanced input circuit

Connectors:    Female XLR; Male XLR loop

Nominal impedance:   electronically balanced 10k Ohms

AC Power 

Connectors:   Female PowerCon, in, Male PowerCon loop

Input voltage (EU):   115V - 250V AC

DSP 

Sampling rate:   96 KHz

Basic delay:   0.76 ms

Dynamic range:   115dB

Remote / Network 

Type: Ethernet

Connectors:    RJ45 female, RJ45 loop

Mechanical 

Cabinet size (WxHxD):   590 x 350 x 321mm

Cabinet finish:   Black epoxy painted

Protective grill:   Removable perforated steel grill covered with charcoal grey foam

Weight:   23Kg

Elements & Accessories 
  • SUB28-amp
  • SUB112-amp
  • SUB1-amp
  • SUB3-amp
  • SUB400-amp

 

Pdf 
MP10_amp.pdf
Applications 
Clubs and discos
Concert halls
Theatres, Cinemas & HC
Touring festivals & fashion
References 
Church in Jakarta, Indonesia

(1) Frequency response: +/- 3dB, measured at 3 meters, on axis, half-space conditions -  MLSSA 1/3 octave

(2) Max peak SPL: Measured with music referred to 1 meter

(3) Crossover: Acoustical crossover frequency - at these frequency, transducers produce equal sound pressure level

(4) AES: Power handling is measured under AES standard conditions

(5) Power AMPS: Amplifier RMS output power per channel into 2 ohms, both channel driven