RubiQ
Passive or self-powered, RubiQ system is an ultra-compact 2 way system that can be composed of one SUB28 Band-Pass Subwoofer and two or four Qube3 satellites. RubiQ System is designed to operate in small to medium size indoor installation requiring high quality sound and stylish design.
The SUB28 Subwoofer consists of two long excursion 8” cone driver mounted in a proprietary isobaric band-pass enclosure. The Qube3 consists of one 3.5” full range cone driver mounted in a wood fashion enclosure.
- High Hifi sound quality
- Design
- Passive (RubiQ-2 or RubiQ-4) or self-powered (RubiQ-2-amp or RubiQ-4-amp)
- Custom box and grille, available in any color and any wood essence
ACOUSTICAL
Frequency response (1): 42Hz - 22'000Hz +/- 3dB (SUB28: 42 – 180Hz; Qube3: 180 – 22’000Hz)
Phase response: 350Hz – 10KHz +/- 45°
Maximum peak SPL (2): 118dB
Coverage: Horizontal/Vertical: 100°
TRANSDUCERS
SUB28: 2x8” long excursion, low distortion cone driver
Nominal impedance: 4 Ohms
Power Handling: 120W RMS (AES) (4)
Qube3: 1x 3.5” full range cone driver
Nominal impedance: 8 Ohms
Power Handling: 30W RMS (AES) (4)
AMPLIFIER MODULE
Output power: SUB28: 2 x 190W Class D
Qube3: 2 x 190W Class D
AUDIO INPUT:
Type: Analog differential balanced input circuit,
Connectors: 2x XLR female (left/right)
Nominal impedance: 10 KΩ
XLR wiring: 1=GND, 2=Hot, 3=Cold
DSP:
Sampling rate: 24bit/96Hz
Basic delay: 0.76 ms
Dynamic range: 113dB
AC power:
Connector: IEC Main connector,
Input voltage: 115 – 250V nominal +/- 10%
MECHANICAL DATA
SUB28 size (WxHxD): 252 x 450 x 500mm
Cabinet finish: 15mm MDF, any colors
Weight: 17kg
RubiQ3”: 110 x 110 x 80mm
Cabinet finish: 16mm MDF, any colors
Weight: 0.8Kg
(1) Frequency response: +/- 3dB, measured at 3 meters, onaxis, half-space conditions – MLSSA 1/3 octave
(2) Max peak SPL: Measured with music referred to 1 meter
(3) Crossover: Acoustical crossover frequency - at these frequency, transducers produce equal sound pressure level
(4) AES: Power handling is measured under AES standard conditions
(5) Power AMPS: Amplifier RMS output power per channel into 2 ohms, both channel driven
Frequency response (1): 42Hz - 22'000Hz +/- 3dB (SUB28: 42 – 180Hz; Qube3: 180 – 22’000Hz)
Phase response: 350Hz – 10KHz +/- 45°
Maximum peak SPL (2): 118dB
Coverage: Horizontal/Vertical: 100°
SUB28: 2x 8” long excursion, low distortion cone driver
Nominal impedance: 2x 8 Ohms
Power Handling: 120W RMS (AES) (4)
Qube3: 1x 3,5” full range cone driver
Nominal impedance: 8 Ohms
Power Handling: 30W RMS (AES) (4)
Output power: SUB28: 2 x 190W Class D
Qube3: 2 x 190W Class D
Type: Analog differential balanced input circuit,
Connectors: 2x XLR female (left/right)
Nominal impedance: 10 KΩ
Connector: IEC Main connector,
Input voltage: 230V nominal +/- 10%, 115V on request
Sampling rate: 24bit/96Hz
Basic delay: 0.76 ms
Dynamic range: 113dB
SUB28 size (WxHxD): 252 x 450 x 500mm
Cabinet finish: 15mm MDF, any colors
Weight: 17kg
RubiQ3”: 110 x 110 x 80mm
Cabinet finish: 15mm MDF, any colors
Weight: 0.8Kg
Mounting bracket for wall and ceiling: W100 black or white
(1) Frequency response: +/- 3dB, measured at 3 meters, on axis, half-space conditions - MLSSA 1/3 octave
(2) Max peak SPL: Measured with music referred to 1 meter
(3) Crossover: Acoustical crossover frequency - at these frequency, transducers produce equal sound pressure level
(4) AES: Power handling is measured under AES standard conditions
(5) Power AMPS: Amplifier RMS output power per channel into 2 ohms, both channel driven