SIGNATURE KS12.0
The Audio Performance SIGNATURE KS-12.0 is a 3Way self-powered monitor system with performances comparable to much larger systems.
It is a high-precision device with excellent efficiency and low distortion which provides very precise stereo imaging.
Consisting of a main enclosure containing a 12” low-frequency driver, two 6.5” mid-frequency drivers, and HF 1” fabric dome tweeters with advanced waveguides.
A second enclosure can also be brought into play containing one 12” low-frequency driver.
This design allows sound engineers to create different setups according to their environment.
Neodymium and long excursions are also the main features that add to the excellent driver performance.
The KS-12.0 has a built-in electronics package feature which contains a new lightweight, three-channel class D audio power amplifier designed specifically for self-powered products.
It incorporates a complete networked 96KHz digital signal processing (DSP) providing loudspeaker-specific filtering, EQ, delays, and protection functions.
Sophisticated amplifier protection systems continuously monitor all aspects of performance to ensure that the amplifier and associated drivers are always working within their safe operating areas
Net Control PC application provides real-time control and monitoring functions to either single units or whole networks of Audio-Performance self-powered loudspeakers through Ethernet CAT5 cable. In addition, the SIGNATURE KS-12.0 provides input volume control and 8 factory presets including high pass, low, and high shelving filters.
- High efficiency
- Low distortion
- Precise stereo imaging
- FIR filtering
Keep empty
Frequency response (1): 25-21'000HZ +-3dB
Phase response: 350Hz - 18KHz +-10°
Maximum peak SPL (2): 132dB
Coverage : H 90° x V 80°
Low frequency: 2x 12 inch, Neodymium long excursion, low distortion cone driver
Mid frequency: 2x 6.5 inch, Neodymium, low distortion cone driver
High frequency: 1x 1 inch dome tweeter, fabric diaphragm loaded with Audio Performance waveguide
Output power (low) (5): 500W RMS
Output power (MID (5): 500W RMS
Output power (high) (5): 150W RMS
THD, DIM, SMPTE: <0,05%
Type: Analog Differential balanced input circuit / AES
Connectors: Female XLR; Male XLR loop (Analogue)
Nominal impedance: 10K Ohm
Connectors: PowerCON TRUE1
Input voltage: 115V - 230V nominal +/- 10%
Input voltage selection: Automatic
Sampling rate: 96 KHz
Basic delay: 0.76 ms
Dynamic range: 115dB
Cabinet Size (WxHxD): 350 x 1'500 x 525mm, 5° tapered
Cabinet finish: 12 & 15mm plywood, rounded edges, and corners, hard-wearing painted in white
Weight: 35Kg
- HCSUB115-amp
- HCSUB112-amp
(1) Frequency response: +/- 3dB, measured at 3 meters, on axis, half-space conditions - MLSSA 1/3 octave
(2) Max peak SPL: Measured with music referred to 1 meter
(3) Crossover: Acoustical crossover frequency - at these frequency, transducers produce equal sound pressure level
(4) AES: Power handling is measured under AES standard conditions
(5) Power AMPS: Amplifier RMS output power per channel into 2 ohms, both channel driven