SK-F

The SK-F loudspeaker system is a fully horn loaded compact cabinet made for applications where directivity and power are of importance. The SK-F system is a processor controlled 3way design, with 2way active LO & MID/HI. The MID & HI sections use a sophisticated built-in passive crossover. The patent pending 3waydesign allows better performance in terms of power handling and distortion: using an 1” high frequency driver means having less distortion above 2kHz in comparison to a conventional 2” driver because of diaphragm resonance. The three drivers share the same horn, acoustically aligned at the same vertical plane producing thus an astonishing flat and smooth frequency response from 60Hz to 20kHz.

Key features 
  • High efficiency
  • Medium throw
  • Arrayable
  • Compact
Specifications 

Keep empty

Acoustical 

Frequency response (1):   60Hz - 20KHz

Maximum peak SPL (2):   140dB

Directivity: H 45° x V 50°

Transducers 

Low frequency:     1x 12", ferrofluid cooled, horn loaded with phase plug
Nominal Impedance:   8 Ohms
Power Handling (4):    400W (AES)

Mid frequency:   1 x 8", ferrofluid cooled horn loaded with phase plug
Nominal Impedance:   16 Ohms
Power Handling (4):    250W (AES)

High frequency:    1 x 2" diaph. compression driver, 16 Ohms loaded with CD horn
Nominal Impedance:   16 Ohms
Power Handling (4):    100W (AES)

Connectors:   2 x Neutrik Speakon NL4MP (wired in parallel)

Mechanical 

Cabinet Size (WxHxD):   547 x 825 x 617 mm 

Cabinet finish:   Black epoxy painted, other colours on request

Rigging:   L-track, incorporated into both the front and the back of the cabinet

Protective grill:   Front metal grill covered with charcoal grey foam

Weight:   49.5Kg

 

Elements & Accessories 
  • LM3
  • SUB3
  • SUB400
  • SUB800
  • AP44M10
  • SK-F-Trolley
     

 

Pdf 
SK-F.pdf
Galerie 
Applications 
Clubs and discos
Concert halls
Stadiums
Theatres, Cinemas & HC
Touring festivals & fashion
References 
Blue Note Milano, Italy

(1) Frequency response: +/- 3dB, measured at 3 meters, on axis, half-space conditions -  MLSSA 1/3 octave

(2) Max peak SPL: Measured with music referred to 1 meter

(3) Crossover: Acoustical crossover frequency - at these frequency, transducers produce equal sound pressure level

(4) AES: Power handling is measured under AES standard conditions

(5) Power AMPS: Amplifier RMS output power per channel into 2 ohms, both channel driven