SUB112-amp

The SUB112-amp is a compact, self powered subwoofer designed to extend the frequency range and power bandwidth of Audio Performance full-range loudspeaker systems. With a cut-off frequency of 45Hz, the SUB112-amp is made for applications where the reproduction of sub frequencies is of major importance (music, live sound). It consists of one long excursion 12-inch cone driver mounted in a heavily braced vented enclosure. 

The SUB112-amp built-in electronics package features a new lightweight, two channel class D audio power amplifier designed specifically for Self-Powered products.The amplifier module is a sophisticated switch mode power supply, class-D amplifier design capable of delivering more than 1 x 2'500W RMS into 4 ohms and adding only 3Kg to the weightof the cabinet.

Key features 
  • Self-powered
  • High pressure level
  • DSP controlled subwoofer
  • 45Hz cut-off Frequency
  • Custom box and grille available in any colour and any wood essence
Specifications 

Keep empty

Acoustical 

Frequency response (1):  45Hz - 150Hz, +/- 3db

Maximum peak SPL (2):   131dB

Transducers 

Low frequency:   1 x 12 inch, ferrofluid cooled, long excursion

Amplifiers 

Output power1 (Sub) (5):   1x 1'250W RMS 2 Ohms

Output power2 (Sat ) (5):   1x 1'250W RMS 4 Ohms

THD, DIM, SMPTE:   <0,05%

Audio Input 

Type:   Analog Differential balanced input circuit

Connectors:    Female XLR; Male XLR loop

Nominal impedance:   10K Ohm

 

AC Power 

Connectors:   Female PowerCon, in

Input voltage:   115V - 230V nominal +/- 10%

DSP 

Sampling rate:   96 KHz

Basic delay:   0.76 ms

Dynamic range:   115dB

Mechanical 

Cabinet size (WxHxD):   450 x 450 x 618mm

Cabinet finish: black epoxy painted

Protective grill: 1,6mm steel, foam cover inside

Weight:   32Kg                       

Elements & Accessories 
  • AP Passive Range of Loudspeaker
  • M20 connecting plate
Pdf 
SUB112_amp.pdf
Applications 
Conferences rooms
Theatres, Cinemas & HC

(1) Frequency response: +/- 3dB, measured at 3 meters, on axis, half-space conditions -  MLSSA 1/3 octave

(2) Max peak SPL: Measured with music referred to 1 meter

(3) Crossover: Acoustical crossover frequency - at these frequency, transducers produce equal sound pressure level

(4) AES: Power handling is measured under AES standard conditions

(5) Power AMPS: Amplifier RMS output power per channel into 2 ohms, both channel driven